Purchase and product
How do I determine what size bath to purchase?
Generally, the size of the bathing area in the bathroom will determine whether a 5-foot, 6-foot or corner bath is selected. If space is not an issue then other factors can be considered. Most consumers' compare the features, performance, style, comfort and price of the various baths being evaluated.
Are Whirlpool bathtubs expensive to operate?
No more than any other major household appliance. The motor, heater, and any other options are standard 110-volt, so the average cost to operate your Izzi Whirlpool is only pennies a day.
Can I match the color of my toilet, sink, and bathroom fixtures to my whirlpool bathtub?
Yes Izzi Whirlpools are available in over 30 colors and we are continually adding new ones. We match all major plumbing ware manufacturers’ colors - Kohler, American Standard, Eljer, and others. We also offer marble and granite acrylic colors.
How long will it take to get my order?
All Izzi Whirlpools are custom made to order. However, due to our revolutionary manufacturing process, long lead times are not a problem. Your personal unit, including specified size, shape, color, and options will ship no later than 10 working days after your order- in most cases, sooner.
At what stage of home construction is the whirlpool bathtub installed?
They are almost always installed at the framing stage in order to be signed off by the inspector for the plumbing inspection, which is usually, 4 -6 weeks into the project.
Why should I install an Izzi whirlpool tub in my home?
There are many good reasons!
Medical: Hydrotherapy has been proven to be one of the best and most effective forms of relief for certain medical conditions such as muscle and joint pain, back and neck aches, sprains, stiffness, and other minor injuries.
Stress Relief: Hydrotherapy massage is a fast and effective form of stress relief that is readily available for everyone in the family. The wide variety of jet options, lumbar massage system, and air massage system offer the ultimate flexibility in relief from stress and muscle stiffness.
Resale Value: Studies have shown that a bathroom remodeling project that features the addition of an acrylic whirlpool bath can increase the resale value of your existing home by as much as $15,000 to $20,000. Luxury bathroom options are a highly valued feature in today's housing market.
Are whirlpool bathtubs safe?
Yes, they are every bit as safe as your standard bathtub or shower. Unlike outdoor spas or hot tubs (which are similar to swimming pools), your indoor whirlpool bathtub is emptied after each use. There are no chemicals or stored water involved. The entire unit, as well as each of the components used in the production of it is NAHB tested and UL approved. Your Izzi Whirlpool bathtub meets all national and local codes.
What size water heater will I need?
As a rule of thumb, the water heater should be at least 2/3 of the capacity of the tub.
Can I order my whirlpool without the waste overflow drilled, in order to have a higher water fill?
Yes, but be aware this is a plumbing code requirement in the US.
Do I have room to install a whirlpool bathtub in my bathroom?
Izzi offers over 30 different shapes and sizes of acrylic whirlpool baths. They are available in sizes ranging from 32" x 60" to replace a standard or existing tub, to a luxurious deck-mounted 82" x 62" and all sizes in between. There are models with integral acrylic skirts and flanges and sizes that will fit into a corner. Also, just like a standard bathtub, many models can be used with or without a shower. All of the plumbing (including the pump and optional upgrades) are installed under and within the parameters of the tub so no remote component installations are necessary.
Are whirlpool bathtubs hard to install?
Izzi whirlpool bathtubs are by far the easiest units in the industry to install. Our rigid base does not require a concrete mud set. All of the power components (pump motor, heater, optional on/off switch) are supplied with a cord and plug. No need to wire - simply plug into a wall outlet. All whirlpool baths run on standard 110v power. There are no special electrical requirements. Nor are there any additional plumbing needs other than the standard water supply and waste drain.
I want to use my whirlpool bath as a shower also, is this possible?
Yes, but only if you use whirlpool baths that are designed for this purpose. They must have a tiling flange or drip less edge, and have the controls on the side of the tub. The deck must drain towards the bowl and not towards the drip less edge. Oval tubs are usually out of the question unless they are used with oval shower curtain. To learn more go to: http://izzibath.com/skirtedbathtubs.html
Can the pump be mounted in a different location?
It is best to have the factory mount the pump directly on the whirlpool bathtub in the most accessible location for your bathroom. If necessary, the pump can be mounted as much as eight feet away from the tub. The pipes connecting the pump to the whirlpool system should be straight. The pump must be at the proper height - higher than the suction fitting and lower than the jets, and it should be indoors.
What's a whirlpool bathtub tiling flange and will I need one on my tub?
The tile flange goes around the tub deck and sticks up behind the wall tile (or other wall finish). It prevents water from dripping off the deck and onto the floor. Every tub that will be installed against one, two, or three walls should have a tile flange. This is especially critical on tubs that will be used as showers.
May I install an in-line heater on my Izzi whirlpool after purchase?
You may install an in-line heater on your Izzi unit after purchasing it; however, the heater must be an Izzi in-line heater to prevent voiding the warranty and the NAHB approvals on the jetting system.
What is a Roman tub faucet?
A Roman tub faucet is a tub set that is mounted on the deck of a tub, not on the wall. It is usually larger than a standard tub faucet set.
What is the difference between a whirlpool tub and an air bath?
A whirlpool tub has jets that circulate the water, whereas an air bath uses air bubbles that rise gently from the bottom of the tub. Whirlpools are typically used for therapy, air baths are used for a much gentler experience. Air baths can be used with aromatherapy/essential oils. Both offer a spa-like experience.
What is the difference between acrylic and fiberglass, cast iron, steel, synthetic (like limestone) tubs?
Acrylic is a solid sheet material that is heated and vacuum-formed to the desired shape. It is then reinforced at the back with fiberglass to give it strength. It is a high-end material, very durable and super easy to clean.
Fiberglass is a material that adheres to a mold and then a shiny gel coat finish is sprayed onto it. It is the most common material used in tubs and showers and is the most economical.
Cast iron tubs are forged and a shiny finish is applied in powder form while the tub is hot, causing the finish to melt onto the cast iron.
Synthetic tubs are molded and then a gel coat finish is applied like the fiberglass tubs.
I’m ordering an Izzi whirlpool bath for my remodeling project, is there anything else I will need to complete the project?
Yes, you will need a waste overflow and drain kit and a Roman tub faucet with or without a hand shower.
What type of waste overflow and drain kit will I need for my Izzi whirlpool bath?
The color is up to you, but it must be an 18 to 20 inch and not the 12 inch used on regular tubs.
My contractor is ready to install my Izzi whirlpool bath and informed me that I need to select a Roman tub faucet. I want a hand shower, but don’t have the budget for it. Could I use a kitchen pullout faucet at half the cost?
It has been done before, but would only provide 1/3 the flow of the Roman filler which is 7-12 GPM. It would increase your fill time from 5 minute with a roman spout, to approximately 15 minutes.